How to make a little BookMaking a little book
Choice of 3 ways to a paper book
Pleat a sheet of unfolded sheet ofaper. Wrinkles are important for the book because the design of your wrinkles determines the design of your book. Think about pushing your finger nail or something solid like the rim of a crayon over the cuff. Begin unfolding the sheet so that it is long and thin (long edges unfolded to long edges).
Then, in half a small selvedge, folds the sheet into a small selvedge. Folds the piece of cardboard back in the middle, close the edges. Expand the sheet. This will be the pages of your book. Folds the shorter side of the sheet onto the shorter side. It is advisable to crease the sheet in half the opposite direction from your first crease.
Trim the sheet of tape. Load the sheet so that the pleated side faces you. Then, along the center of the waistband, trim until it cuts the waistband line. All you do is slice a slot in the piece ofaper. You don't slice it all the way through.
Expand the sheet. Now it should have the eight initial folding boards, but there should be a slot in the centre of the sheet, between the four in between. Folds the piece of wrapping around the centre, long side to long side. Repetition of your very first wrinkle. Before cutting, the part of the sheet should be in the centre of the folding area.
Folds the sheet into a book form. Rotate your sheet so that the cutting line is facing up. Reversing the crease at one of the sutures. Knock out your book. Select two neighboring "wings" of the book and slide them towards each other by including the other pages of the book.
When you want the book to keep its form, you can tie your book with a staple or cord (see "Binding your book" below). Choose how many pages your book should have. Number of pages determines how much you need.
A book of twelve to twenty-four pages (including front pages) consists of six to twelve pages of document. The knowledge of the purposes of your book will help you to determine the correct number of pages. Also consider a piece of custom or colour wrappingaper. Select the type of hardcopy for your book.
Simple blank printing papers work well, but you can choose a different type of printing according to the book's use. In this manual it is assumed that you are using default stationery (8.5 "x11"), but other formats may also work. Higher weights (thicknesses) can be more stable than printing papers.
Re-sume sheet of papermaking with a coloured surface provides a beautiful optical effect when you are planning to give the book as a present. If possible, do not use padded notepadaper. They will be printed vertically and the book will not look as beautiful as other papers.
Folds your wrapping in two. Folds each side of the sheet you have selected from the shorts end to the shorts end. Wrapping each page separately will give you a smoother wrinkle and more even strokes than trying to collapse all pages at once. Tighten your wrinkle by gliding along the edges with your finger nail or a rigid item such as a stylus or lead.
Nesting the pages of your book. When you have more than six pages of hardcopy, make sentences of pages of no more than six pages. When you put more than six pages together, the inside pages will project beyond the outside pages and your book will not look well.
When you have an even number of pages, try to create even sentences of book segments (e.g. 2 sentences of 6, 3 sentences of 4 or 4 sentences of 3 pages). Stitch your book parts. You can stitch each book section here for a more stable closing projec.
Put at least two brackets as near as possible to the edges of each section. Attempt to scale the staples arrangement on the segments in such a way that no bulging from a pile of staples occurs when the segments are bound together. Set up your book areas.
Make sure you align the parts of your book well. Fold the book part folds together. When one of the pages protrudes, it may not be properly pleated. It can be replaced by a page that has been pleated well. Tuck your book in.
Choose a sheet of sheet of hard copy to use on your bookcase. Use coloured or heavy papers or decorate the envelope with postmarks, labels or other items. Fold your book sleeve in half a long end to a shorter end and wrinkle the edges tight.
The time you place the envelope on your pages will depend on the kind of bindings you select. Glue the pages of your book together. Useful if your book has more than one page section that has been stitched together. Trim a slice of adhesive paper, e.g. adhesive paper, slightly longer than your book.
Place the ribbon gently on the front of the book back and wind it around the back so that half of the ribbon is on each side of the front and back of the book. Trim off surplus adhesive from the top and bottom. Stick the book jacket to your book. To stick a book section sleeve to the glued book section, first place the book's pleated sleeve over the glued book section pages.
Trim two sheets of adhesive paper to the same length as the book. Folds the ribbon halfway with the adhesive side outwards. Remove the back of your book and place the pleated ribbon along the pleat on the inside of the back jacket. There is one side of the ribbon on the inside of the back and one side on the outside of the last inside.
Do not forget to open the front of your book envelope. Lay the second sheet of adhesive paper, also longitudinally pleated, along the fold between the inner front envelope and the outside of the first inner side. Closing the book, hold your hands tightly along the pleated edges to hold the glued parts in place.
You can use a cord or band to tie your book. You do not need to stitch or glue your book parts with this technique. When using an envelope, place the fold-over envelope over the piled book parts. You can use a perforator to puncture the whole book where you want the binder to be.
Perforations should be near the pleated edges of the book, but be careful not to puncture the pleated vertebra. At least make two of them. When you have more than six sheets of sheet material, you can cut the hole in each book section individually, but make sure that the hole is sized so that it is properly aligned when combining the two.
The following tutorial will help you to create a small book. Kids who make a book of papers should be carefully monitored when using the shears.